Loading ...
Loading ...
Loading ...
31
To submit Data Logging reports in Diagnostics
1. Tap the Diagnostics application button from the MaxiSys Main Screen. The
Data Logging button on the diagnostics toolbar is available throughout the
Diagnostics operations.
2. Tap the Data Logging button to display the error options. Select a specific error,
and a submission form will appear to let you enter the report information.
3. Tap the Send button on the upper-right corner of the screen to submit the report
via the Internet, and a confirmation message appears when sent successfully.
Current Directory Path
The Directory Path shows all directory names to access the current page.
Status Information Bar
The Status Information Bar at the top of the Main Section displays the following items:
1. VCI Icon — indicates the communication status between the tablet and the VCI
device.
2. Battery Icon — indicates the battery status of the vehicle.
Main Section
The Main Section varies depending on the stage of operations which shows vehicle
identification selections, the main menu, test data, messages, instructions, and other
diagnostics information.
The Main Section of Auto Scan screen displays a System List for all vehicles.
System List Tab Page
Column 1 — displays the system numbers.
Column 2 — displays the scanned systems.
Column 3 — displays the scan results.
-!-: Indicates that the scanned system may not support the code-reading function, or
there is a communication error between the tester and the control system.
-?-: Indicates that the vehicle control system has been detected, but the tester cannot
access it.
Fault | #: Indicates there is/are fault code(s) detected; “#” indicates the quantity of
detected faults.
Pass | No Fault: Indicates the system was scanned and no faults detected.
Not Scanned: Indicates the system has not been scanned.
No Response: Indicates the system has not received a response.
Loading ...
Loading ...
Loading ...