Loading ...
Loading ...
Loading ...
Changing the settings
146
En
• The [PAD FX1] mode button is not lit: Cross Reverse is turned off.
(Default)
The left side of the crossfader is for deck 1 and the right side is for
deck 2.
Crossfader Cut Lag
You can adjust the cut lag (the range where no sound is heard from the
relevant deck) at both edges of the crossfader.
You can make adjustments in increments of 0.1 mm within a range of
0.3 mm to 5.5 mm. (Setting value: 1 through 53)
• The setting amount for the Cut Lag is a guide, and may not be exact.
• The default Cut Lag amount is 1.0 mm. (Setting value: 8)
Turn the rotary selector.
The number of lights that are lit up on the channel level indicators and
Performance Pads indicates the setting value (1 through 53).
• The number of lights that are lit up on Performance Pads on the right
deck: tens place.
• The sum of the number of lights that are lit up on the channel level
indicators on channel 1 and 2: ones place.
E.g. 2 lights on Performance Pads on the right deck, plus 3 lights on
channel 1, plus 5 lights on channel 2 means the total value is 28 (20
+ 3 + 5 = 28).
Demo mode
In normal conditions, if you don’t use any features for a specified
amount of time, the unit will enter Demo mode.
• When any knob or button on the unit is used during Demo mode,
Demo mode is canceled.
Press one of the Performance Pads 1 through 4 on the left deck.
• Pad 1 is lit: Demo mode is switched off.
Loading ...
Loading ...
Loading ...