Loading ...
Loading ...
Loading ...
Changing the settings
145
En
Utilities mode settings
You can change the following settings in Utilities mode:
• Back Spin Length
• Fader Start
• Crossfader Reverse
• Crossfader Cut Lag
• Demo mode
Back Spin Length
When using a jog wheel to perform a Back Spin, you can make the
Back Spin longer or shorter than the amount you rotate the jog wheel
by.
You can set the Back Spin Length to short, normal, or long.
Press one of the Performance Pads 5 through 7 on the left deck.
• Pad 5 is lit: Back Spin Length short
• Pad 6 is lit: Back Spin Length normal (Default)
• Pad 7 is lit: Back Spin Length long
Fader Start
Press the [HOT CUE] mode button on the left deck.
• [HOT CUE] mode button is lit: Fader Start is turned on. (Default)
• [HOT CUE] mode button is not lit: Fader Start is turned off.
Crossfader Reverse
You can switch the left and right of the crossfader to the opposite side.
Press the [PAD FX1] mode button on the left deck.
• The [PAD FX1] mode button is lit: Cross Reverse is turned on.
The left side of the crossfader is now for deck 2 and the right side is
for deck 1.
Loading ...
Loading ...
Loading ...