Loading ...
Loading ...
Loading ...
©2021 Sharp NEC Display Solutions, Ltd. Page 47 of 86
Note: If you select ENABLE, the display power will not automatically be turned on when the Compute
Module turns on.
6.8 Slot Compute Module Power Setting Off Warning
Available options: Enable / Disable
When enabled, a warning will be shown when shutting down the power to the Compute Module that the
Compute Module should be turned off from within the OS.
Note: This function is available when POWER SUPPLY is OFF.
6.9 Slot Compute Module Advanced Setting Shutdown Signal
Available options: Enable / Disable
Enables or disables the use of GPIO 23 to signal that power to the compute module will be shutting down.
Note that a monitoring utility must be installed to watch the GPIO 23 shutdown signal and shut down the
operating system accordingly.
See Section 5.10 on page 38 for information on configuring the operating system support.
Loading ...
Loading ...
Loading ...