Loading ...
Loading ...
Loading ...
©2021 Sharp NEC Display Solutions, Ltd. Page 45 of 86
6.3 Slot Compute Module Power Control Reset
Available options: (SET command function only)
Forces a shutdown and restart of the Compute Module when it does not respond to a shutdown using the
POWER BUTTON function. Press the SET button on the IR Remote with this function highlighted.
Note: This function may corrupt data files on the Compute Module and data files on any storage device
connected to the Compute Module interface card.
6.4 Slot Compute Module Power Setting Auto Power Up
Available options: Enable / Disable
The Compute Module will be turned on automatically when the display power is turned on.
6.5 Slot Compute Module Power Setting Auto Shutdown
Available options: Enable / Disable
Selects how power to the Compute Module is managed when the display switches to standby mode.
• Enable – When the display is turned off, power to the Compute Module will also be turned off. If
AUTO SHUTDOWN is enabled, this will be performed first to allow the system to gracefully shut
down before power is removed.
Loading ...
Loading ...
Loading ...