Loading ...
Loading ...
Loading ...
©2021 Sharp NEC Display Solutions, Ltd. Page 17 of 86
Confirm the heatsink is seated correctly by looking at the screw-hole posts on the Interface
Board. The two posts on the outside edge should be inserted and flush to the surface of the
heatsink. The heatsink rests on top of the two posts closest to the USB and LAN ports
connection.
Check the distance between the Interface Board and the heatsink; it should be equal on all sides,
the thermal sheet should press against the Compute Module, and the two screw-hole posts on
the outside edge should be inserted into the heatsink.
Figure 2-6: Check all sides of the heatsink
Loading ...
Loading ...
Loading ...