Loading ...
Loading ...
Loading ...
©2021 Sharp NEC Display Solutions, Ltd. Page 14 of 86
2 Installing the Compute Module and NEC Compute
Module Interface Board to the Display
1. Disconnect AC power from the display.
2. Install a Compute Module into the connector of the Interface Board. Check that the Compute
Module is oriented correctly before fully inserting it into the connector. Carefully align the two
rows of connectors and press together evenly to snap together.
Caution: Take static precaution measures when handling the boards.
Figure 2-1: Install the Raspberry Pi Compute Module
3. Confirm the Compute Module is correctly mated by looking at each corner of the Interface
Board. Metal posts should protrude from two corners, diagonal from each other.
Figure 2-2: Confirm correct installation by alignment of metal posts
Note: to ensure proper orientation for Compute Module installation, the Interface Board has
two diagonal posts that protrude through two corners of the Compute Module. The opposite
two corners of the Compute Module rest on two screw hole pillars. It is not necessary to secure
Loading ...
Loading ...
Loading ...