Loading ...
Loading ...
Loading ...
!
!!
8
!
!
!
Connections and setup
Refer to your TV’s Quick Start Guide or other provided documentation to for model-
specific information about attaching the base or a wall mount and making
connections to AC power and to your other audio/video devices.
Before initial setup
Protect against power surges
•! Connect all components before you plug any power cords into the wall outlet
or power strip.
•! NEVER plug your TCL Roku TV into an outlet that is controlled by a wall
switch.
•! Turn off the TV before you connect or disconnect any cables.
•! Make sure all antennas and cables are properly grounded. Refer to the
Important Safety Instructions.
Safety information
•! Prevent TV from overheating by placing in an area with good ventilation.
•! Do not block ventilation holes on the TV. Position the TV so air can circulate
freely on all sides.
•! Do not stack objects on the TV.
•! If you place the TV on a stand, make sure you allow adequate ventilation.
•! If you connect an audio receiver or amplifier to the TV, place it on the top shelf
so the heated air will not overheat the TV.
Avoid audio interference
•! Position cables properly; insert each cable firmly into the designated jack.
•! Route all cables down one side of the back of the TV instead of straight down
the middle.
•! If your antenna uses 300-ohm twin lead cables, do not coil the cables.
Loading ...
Loading ...
Loading ...