Loading ...
Loading ...
Loading ...
SDG7000A User Manual
WWW.SIGLENT.COM 91 /
133
11.4 Channel Tracking/Coupling/Copy
Channel track/coupling/copy can be set up under the 'Dual-Channel Setting' page. The ability
to track, copy, and couple between two channels ensures that parameters from one channel
are quickly transferred to the other as required, greatly simplifying operation and meeting the
need for fast, simultaneous waveform switching.
Table 11-2 Description of channel tracking/coupling/copy
Type of operation
Description
Track
The parameters of the two channels are fully synchronized and the
parameters set for one channel are automatically passed to the
other channel, where the two channels are duplicates of each other.
In tracking mode, the device will force the phase mode to "Locked"
and only allow the setting of CH1.
Coupling
The parameters of the two channels are coupled in a certain
relationship with CH1 as reference so that the parameters of one
channel are automatically converted and passed to the other
channel according to the coupling relationship.
The coupling parameters that can be set are frequency, amplitude,
and phase, and the coupling relationship can be proportional or
deviated.
Copy
Manually copy parameters from one channel to another. Changing
the parameters of one channel after that will not cause the
parameters of another channel to change.
Application example: Use the channel copy function and the waveform combine
function to generate a two-tone signal at frequencies 10 MHz and 10.1 MHz. the
output amplitude is 0 dBm for both frequencies
1. Set "Waveform" of the carrier to "Sine", "Frequency" to 10 MHz, "Load" to 50 Ω, and
"Amplitude" to 0 dBm in the parameter setting page of CH1.
2. Execute the channel copy function "CH1 -> CH2" on the "Dual-Channel Setting"
page
Loading ...
Loading ...
Loading ...