Loading ...
Loading ...
Loading ...
SDG7000A User Manual
WWW.SIGLENT.COM 55 /
133
Table 9-9 Increasing method
Increasing method
Description
Interpolation
Linear interpolation between points
Zero
Fill zero after the waveform’s end
Hold last
Repeat the last point after the waveform’s end
Duplication
After the waveform’s end, repeat the waveform points from the first
point until the length of the segment is reached
Table 9-10 Decreasing method
Increasing method
Description
Decimation
The segment is obtained by proportional decimation of the
waveform.
Cut Tail
Keep the head of the waveform according to the segment length and
cut off the tail.
Cut head
Keep the tail of the waveform according to the segment length and
cut off the head.
The effects of different upsample/downsample methods can be reflected in
the waveform preview.
Table 9-11 Trigger mode
Trigger mode
Description
Button
Click the Trigger button on the menu bar to trigger, equivalent to
manual trigger.
Timer
Triggered by the internal timer.
External
Triggered by the external trigger.
Table 9-12 Run mode
Run mode
Description
Continuous
The continuous cyclic output of the sequence.
Single/Burst
After the trigger conditions are met, the sequence is output for
specified cycles.
Infinite
After the trigger conditions are met, the sequence is output
continuously.
Loading ...
Loading ...
Loading ...