Loading ...
Loading ...
Loading ...
SDG7000A User Manual
WWW.SIGLENT.COM 39 /
133
Mean = 0 V
Bandwidth = 1 MHz
The external load is high resistance
1. If the current parameter setting page is CH1, switch to CH2
2. Set the waveform to "Noise"
3. Set "Load" to "HiZ"
4. Set “Stdev” to 100 mV
5. Set”Mean” to 0 V
6. Open "BandSet" and set the bandwidth to 1MHz in the "Bandwidth" setting box
7. Open output
Following the above steps, the expected noise can be output. The parameter page after setting
is as follows:
The time-domain waveform and spectrum of the actual output noise are as follows:
Loading ...
Loading ...
Loading ...