Loading ...
Loading ...
Loading ...
SDG7000A User Manual
32 / 133 WWW.SIGLENT.COM
Application example: Set CH1 output sine wave with the following parameters
Load = 50 Ω
Frequency = 1 GHz
Amplitude = 0 dBm
Offset = 0 V
Phase = 180°
1. Select the waveform
On the carrier setting page, click the waveform preview region or "Waveform" parameter setting
box, and select "sine" in the pop-up waveform selection dialog box.
OR
2. Set the load
Click the parameter value area of load in the "Load" parameter setting box, and select "50 Ω" in
the parameter selection dialog box that pops up later:
3. Set the waveform parameters
Set frequency: click the parameter value area of frequency in the "Frequency" parameter setting
box, and then type 1 and G in sequence in the pop-up virtual keyboard. The input of
values and units can also be realized using the numeric keyboard and knob on the front panel.
Loading ...
Loading ...
Loading ...