Loading ...
Loading ...
Loading ...
SDG7000A User Manual
WWW.SIGLENT.COM 7 / 133
The position of the instrument should allow easy access to the socket. To make the instrument
completely power off, unplug the instrument power cord from the AC socket.
The power cord should be unplugged from the AC outlet if the instrument is not to be used for
an extended period.
CAUTION: The outer shells of the front panel terminals (CH1, CH2)
are connected to the instrument’s chassis and therefore to the safety
ground.
2.6 Cleaning
Clean only the exterior of the instrument, using a damp, soft cloth. Do not use chemicals or
abrasive elements. Under no circumstances allow moisture to penetrate the instrument. To avoid
electrical shock, unplug the power cord from the AC outlet before cleaning.
Warning: Electrical Shock Hazard!
No operator serviceable parts inside. Do not remove covers.
Refer servicing to qualified personnel
2.7 Calibration
The recommended calibration period is one year. Calibration should only be carried out by
qualified personnel.
2.8 Abnormal Conditions
Do not operate the instrument if there is any visible sign of damage or has been subjected to
severe transport stresses.
If you suspect the instrument’s protection has been impaired, disconnect the power cord and
secure the instrument against any unintended operation.
Proper use of the instrument depends on careful reading of all instructions and labels.
Warning: Any use of the instrument in a manner not specified by the
manufacturer may impair the instrument’s safety protection. This
instrument should not be directly connected to human subjects or
used for patient monitoring.
Loading ...
Loading ...
Loading ...