Loading ...
Loading ...
Loading ...
SDG7000A User Manual
WWW.SIGLENT.COM 103 /
133
14.3 Totalizer Mode
The parameter setting page for the Totalizer mode is as follows:
Current operating mode
Current count value
Working mode parameter setting box. The working mode is marked by
Parameter setting box for Totalizer trigger edge
Totalizer settings
Gate setting box
Clear and reset counting
When the Totalizer mode is selected for counting, the edge of the counting signal has to be set
and a gating setting can also be made. The Totalizer will only count if the gating signal meets
the conditions. Touch Gate to bring up the Gate Settings dialog.
When the threshold type is level, set the polarity of the threshold source (positive or negative).
When the threshold type is after edge, set the slope of the threshold source (rising or falling
edge).
Loading ...
Loading ...
Loading ...