Loading ...
Loading ...
Loading ...
assembly ;........
The following parts are included with Model 1t3.225930
ONLY. . :
Item
No. O.ty.
* LoosePartsBagPart-#68062 Containing FollowingItems:
* A Nut, Hex Head1/2-t3 .................. 8
* A Nut Hex 1/4-20 ....................... 32
* B ScrewTrussHd. 1/4-20 xF/8 ............ 32
* C L0ckwasher,1/4 External ............... 32
* D Foot, Leveling ........................ 4
E Motor ............................... 1
F Leg ................................. 4
G Channel,Support ...................... 2
H Stiffener, Side ........................ 2
J Stiffener, End ........................ , 2
K Support, Motor ....................... 1
HARDWARE FORMOUNTING TOOL & MOTOR
* L Screw,Hex Hd.5/16-18 x 2 1/2 .......... 2
* C LockwasherExt. 5/16 ................... 6
*A Nut, HexS/tG-18 ...................... 6
* M Washer11/321D ...................... 6
* N B01t,Carriage5/16-18 x 3/4 ............. 4
A B C
D
H
G
©
M
ASSEMBLING STEEL LEGS
(MODEL 113.225930 ONLY)
1,
.
3.
4_
5.
Assemble the two (2) End Stiffeners and the two (2)
Side Stiffeners using four (4) 1/4-20 Truss head
screws. The End Stiffeners are placed on top of each
Side Stiffener as shown, insert screws through the
9/32 inch diameter holes and finger tighten 1/4-20
nuts.
Attach the four (4) legs to the side and End Stiffener
using 1/4-20 screws, IockwasherS and nuts as shown.
Remove the four (4) Truss head screws which were
assembled in Paragraph No. One. Place the two (2)
Support Channels as shown, in position, align holes in
supports with holes in the Stiffeners, replace
!ockwashers and nuts. Tighten all nuts using 7/16"
wren ch.
Assemble the motor support to steel legs with 1/4-20
screws and nuts. Motor support can be mounted to
either end of stand. Tighten nuts,
Install leveling feet as shown. To level Leg Set, loosen
nut on inside of leg and turn nut on outside to raise
or lower feet. Adjust all four levelers, if necessary,
and then tighten nuts on inside of leg.
NOTE: These levelers are not intended for height
adjustment.
7
END STIFFENER
1
SCREW
HEX NUT
l _,.,. LOCKWASHER
END
SIDE STIFFENER i
i
o
CHANNEL
SUPPORT
LEG
MOTOR
SUPPORT _
SCREW
\
Loading ...
Loading ...
Loading ...