Loading ...
Loading ...
Loading ...
o sombly
the round opening.
MAKE:SURE BELT HAS NOT SLIPPED OFF OF
MACHINE PULLEY.
BELT
/
CLIPS
(SET 90° APART)
6. Place the bett onto the motor pulley by rotating the
pulley.
7. Snap the belt guard into position.
8_ Move the motor sideways so that the belt is in the
center of the opening in the top of the base.
9, PUSH downward on motor to apply tension to belt
= .... and itighten-motor bolt nuts.
NOTE: It is only; necessary to tension the belt so
that itdoes not slip while running,
lO_i, lf,_::you cannot, Obtain rl,sufficient,_tensiOn with,the
motor pushed all the way down, remO_ie the four
motor bolts and insert them in the next LOWER set
of holes.
\
BELT MU3T BE ON
MACH INE PULLEY
ON-OFF SWITCH
WARNING: DON'T CONNECT POWER CORD
TO ELECTRICAL OUTLET IN YOUR SHOP
UNTIL YOU ARE READY TO CHECK MOTOR
ROTATION.
The On_)ff Switch has a locking feature. THIS FEA-
TURE IS INTENDED TO PREVENT UNAUTHOR-
IZED AND POSSIBLE HAZARDOUS USE BY CHIL-
DREN AND OTHERS.
t. Insert key into switch.
NOTE: Key ismade of yellow plastic
12
Loading ...
Loading ...
Loading ...