Loading ...
Loading ...
Loading ...
as,sembly
MOVES TO THE
a::: Loosen the LOCKING SCREW on the RIGHT.
hi:i: Place Wrench on the ADJUSTING SCREW on the
c;: :Push abrasive belt so it is moving while pulling the
: wrench towa:td you!:: This wiil move the abrasive
be|t to the {eft. PUSHING the wrench will move
the belt to the right,
d. The abrasive belt is tracking properly when it is
centered on the DRIVE pulley.
IMPORTANT: If you have difficulty tracking the
abrasive belt, apply more tension.
9. IF THE ABRASIVE BELT MOVES TO THE LEFT:
a. Loosen the LOCKING SCREW on the LEFT.
b. Place wrench on the ADJUSTING SCREW on the
left.
c. : Push:'abrasiW belt so it ismoving while pulling the
wrench toward you, This will move the abrasive
belt tO:the :tight, PUSHING the wrench will move
the abrasive beit to the left.
d. The abrasive belt is tracking properly when it is
Centered on the DRIVE pulley.
IMPORTANT: If you have difficulty tracking the
abrasive belt, apply more tension_
RIGHT
BELT
LOCKING
SCREW
LEFT
BELT
MOVING
TO RIGHT
BELT ADJUSTING
SCREW
DRIVE
PULLEY
INSTALLING BE LT DUST TRAP
1. Find one 10- 32 x 9/16" Pan Head screw and a lock-
washer among the loose parts.
©
2. Attach the dust trap . _. make sure the top edge is
below the surface of the abrasive belt,
PAN HEAD SCREW
AND LOCKWASHER BELT DUST TRAP
16
Loading ...
Loading ...
Loading ...