Loading ...
Loading ...
Loading ...
assembJy
4. Loosen setscrew in motor pufley and place the pulley
on the shaft with the hub flush with the end of the:
shaft, insert the motor shaft key and tighten setscrew
with 5/32" setscrew wrench.
CHECK MOTOR ROTATION
The motor must rotate COUNTERCLOCKWISE when
viewed from the PULLEY end.
1. Place the motor on your workbench or on the floor.
2. Stand ctear of the motor and plug the cord into a
properly grounded outlet (See page 5). Notice the
rotation of the pulley. If it is not turning COUNTER-
CLOCKWISE, REMOVE the plug from the outlet,
and change the rotation of the motor according to
the instructions furnished with the motor.
WARNING: FOR YOUR OWN SAFETY, MAKE
SURE PLUG IS NOT CONNECTED TO POWER
SOURCE OUTLET.
5/32 INCH
SETSCREW
WRENCH
DIRECTION
OF
ROTATION
\
FLUSH HERE
MOTOR
SHAFT
KEY
1.
Find four 5/16" - 18 x 3/4" carriage bolts, fiat washers,
lock washers and nuts supplied with base.
3/4"
f
/
MOTOR MOUNT -._.,_/
BRACKET
D _:D r_l
[4--9/t6"'-_
i
2. Attach motor by inserting carriage bolts through slots
in motor base and then through slots marked "X" in
motor mount bracket, then place flat washers and
Iockwashers on each bolt ... screw on nuts but DON'T
TIGHTEN them.
VENTILATION HOLES
FACING DOWNWARD
tl
Loading ...
Loading ...
Loading ...