Loading ...
Loading ...
Loading ...
Connecting a Dash Camera to the Powered Mount
WARNING
It is your responsibility to ensure the mounting location complies with all applicable laws and ordinances, and
does not block your view of the road to ensure safe operation of your vehicle.
Before you connect a dash camera to the powered mount, you should mount the dash camera device to your
windshield.
You can use the RV / Camper device mount to power a compatible Garmin dash camera. This can be useful if
you need to connect the RV / Camper device and the dash camera to the same power source in your vehicle.
1 Mount the RV / Camper device in your vehicle, and connect it to power (Mounting and Powering the Device in
Your Vehicle, page2).
2 If necessary, remove the RV / Camper device from the magnetic mount for a better view of the USB port.
3 Plug the dash camera's power cable into the USB port on the mount.
Data Management
The device has a memory card slot for additional data storage.
NOTE: The device is compatible with Windows 7 and newer, and Mac OS 10.7 and newer. Apple computers may
require additional third-party software to read and write files.
About Memory Cards
You can purchase memory cards from an electronics supplier, or purchase pre-loaded Garmin mapping
software (www.garmin.com). Memory cards can be used to store files such as maps and POIs.
Formatting the Memory Card
The device requires a memory card formatted using the FAT32 file system. You can use the device to format
your card using this file system.
You must format a brand new memory card if it is not formatted using the FAT32 file system.
NOTE: Formatting the memory card deletes all data on the card.
1 Select Settings > Device > Storage & USB.
2 Select your memory card.
3 Select > Storage settings > Format > FORMAT SD CARD.
4 Select Done.
58 Appendix
Loading ...
Loading ...
Loading ...