Loading ...
Loading ...
Loading ...
27
CARE & MAINTENANCE
1. Before cleaning, unplug the pressure
cooker and allow to cool completely.
Remove the lid for faster cooling.
• Do not wash or dry the pressure
cooker base in a dishwasher.
2. Wipe the inside and outside of the
cooker with a clean, damp cloth.
• Do not immerse the pressure cooker
base in water.
• Do not spray water inside the cooker.
[Figure 10.1]
1. Allow the inner pot, lid, lid parts, and
steam rack to cool completely. Wipe
away any leftover food residue.
2. Apply soap and water to a soft, damp
sponge. Wash the inner pot and steam
rack and soak in warm, soapy water if
necessary.
3. Clean the inside of the lid. Make sure to
remove any food debris from the anti-
block shield and sealing ring. Do not
submerge lid in water.
4. If necessary, the parts inside the lid can
be removed for cleaning. These parts are
small and easy to lose, so be careful.
a. Remove the sealing ring by pulling
the edge of the silicone out of
the sealing ring rack and wipe
clean. Replace the sealing ring by
pressing it firmly in to the sealing
ring rack to prevent warping. The
sealing ring should fit snugly inside
the sealing ring rack and shouldn’t
fall out when lifting the lid.
Clean your pressure cooker, inner pot, steam
rack, and lid after every use.
Your pressure cooker has a stainless steel,
fingerprint-resistant housing for easy cleaning.
Note:
• Do not use abrasive cleaners, metal scouring
pads, or metal utensils on any part of the
pressure cooker and accessories, including the
inner pot. These will scratch or damage their
surfaces.
• This pressure cooker contains no user-
serviceable parts. Any repairs should
be performed by an authorized service
representative. Contact Customer Support
(see page 34).
Note:
• We recommend hand washing the inner pot,
lid, lid parts, sealing ring, and steam rack.
• The inner pot, lid, lid parts, and steam rack can
be washed in the top rack of the dishwasher,
but may wear more quickly over time.
Cleaning the Pressure
Cooker Base
Cleaning the Inner Pot, Lid,
Lid Parts, and Steam Rack
3. Remove the inner pot. Wipe the heating
element with a soft, dry cloth to make
sure it’s clear of debris.
4. Let all surfaces dry completely before
using the pressure cooker. Always make
sure the heating element inside the
pressure cooker is dry before using.
Figure 10.1
Loading ...
Loading ...
Loading ...