Loading ...
Loading ...
Loading ...
Automatic Low Beam Indicator Light —
If Equipped
This indicator appears when the automatic
low beam headlights are on
page 57.
PowerShot Unavailable Indicator Light
This light alerts the driver that E-Boost mode
is currently unavailable.
Sport Mode On Indicator Light
This light will turn on when Sport mode on is
active.
BLUE INDICATOR LIGHTS
High Beam Indicator Light
This indicator light will illuminate to indicate
that the high beam headlights are on. With
the low beams activated, push the multifunc-
tion lever forward (toward the front of the
vehicle) to turn on the high beams. Pull the multifunc-
tion lever rearward (toward the rear of the vehicle) to
turn off the high beams. If the high beams are off, pull
the lever toward you for a temporary high beam on,
“flash to pass” scenario.
Automatic High Beam Indicator Light —
If Equipped
This indicator shows that the automatic high
beam headlights are on
page 57.
GRAY INDICATOR LIGHTS
PowerShot Available Indicator Light
This light alerts the driver that E-Boost mode
is currently available.
ONBOARD DIAGNOSTIC SYSTEM — OBD II
Your vehicle is equipped with a sophisticated Onboard
Diagnostic system called OBD II. This system monitors
the performance of the emissions, engine, and auto-
matic transmission control systems. When these sys-
tems are operating properly, your vehicle will provide
excellent performance and fuel economy, as well as
emissions well within current government regulations.
If any of these systems require service, the OBD II sys-
tem will turn on the Malfunction Indicator Light (MIL).
It will also store diagnostic codes and other information
to assist your service technician in making repairs.
Although your vehicle will usually be drivable and not
need towing, see an authorized dealer for service as
soon as possible.
CAUTION!
•
Prolonged driving with the MIL on could cause
further damage to the emission control system.
It could also affect fuel economy and driveability.
The vehicle must be serviced before any emissions
tests can be performed.
•
If the MIL is flashing while the vehicle is running,
severe catalytic converter damage and power loss
will soon occur. Immediate service is required.
ONBOARD DIAGNOSTIC SYSTEM
(OBD II) CYBERSECURITY
Your vehicle is required to have an OBD II and a connec-
tion port to allow access to information related to the
performance of your emissions controls. Authorized
service technicians may need to access this informa-
tion to assist with the diagnosis and service of your
vehicle and emissions system.
WARNING!
•
ONLY an authorized service technician should con-
nect equipment to the OBD II connection port in
order to read the VIN, diagnose, or service your
vehicle.
•
If unauthorized equipment is connected to the
OBD II connection port, such as a driver-behavior
tracking device, it may:
○ Be possible that vehicle systems, including safety
related systems, could be impaired or a loss of
vehicle control could occur that may result in an
accident involving serious injury or death.
(Continued)
GETTING TO KNOW YOUR INSTRUMENT PANEL 95
3
Loading ...
Loading ...
Loading ...