Loading ...
Loading ...
Loading ...
2. Push the lock button on another key fob twice, or
push the Passive Entry lock button on the door
handle (with another key fob within range), waiting
three seconds between each push.
3. Wait 30 seconds without unlocking the vehicle or
opening any doors.
To reactivate the previously disabled key fob, the vehicles
must be either unlocked or started with a key fob.
WARNING!
•
When exiting the vehicle, always remove the key
fob from the vehicle and lock your vehicle.
•
Never leave children alone in a vehicle, or with
access to an unlocked vehicle.
•
Allowing children to be in a vehicle unattended is
dangerous for a number of reasons. A child or oth-
ers could be seriously or fatally injured. Children
should be warned not to touch the parking brake,
brake pedal or the gear selector.
•
Do not leave the key fob in or near the vehicle, or
in a location accessible to children, and do not
leave the ignition of a vehicle equipped with Key-
less Enter ‘n Go™ in the ON/RUN position. A child
could operate power windows, other controls, or
move the vehicle.
•
Do not leave children or animals inside parked
vehicles in hot weather. Interior heat buildup may
cause serious injury or death.
CAUTION!
An unlocked vehicle is an invitation for thieves.
Always remove key fob from the vehicle and lock all
doors when leaving the vehicle unattended.
KEYLESS ENTER ‘N GO™ IGNITION —
PHEV ONLY
This feature allows the driver to operate the ignition
with the push of a button as long as the key fob is in the
passenger compartment.
NOTE:
This vehicle is equipped with an automatic shutdown
feature. If the vehicle is left with the ignition in the RUN
position (engine not running) with gear selector in PARK
for 30 minutes, it will automatically turn off the vehicle.
If the driver door is opened, then closed while propul-
sion is active and the vehicle is in PARK, the vehicle will
shut down. Notifications have been designed into this
feature to raise awareness of the timed event by show-
ing messages in the instrument cluster display.
The instrument cluster display will also show the mes-
sage “Ready to Drive” accompanied with three audible
chimes while the driver door is opened while the igni-
tion state is in READY mode. The interior warnings will
occur regardless of whether the key fob remains in the
vehicle or is removed. The horn will sound three times,
and the turn signals will flash, if the key fob is removed
from the vehicle while the ignition state is in READY
mode.
To restart the vehicle, follow the normal process for
starting your vehicle.
The START/STOP ignition button has three operating
modes. The three modes are: OFF, ON/RUN, and START.
NOTE:
•
Pushing the START/STOP ignition button may only
activate the Electric Propulsion System and not start
the vehicle’s engine (if running the engine is not
currently required by the Hybrid system). READY will
show in the instrument cluster display whenever the
vehicle is operating in Electric mode and the vehicle
is stationary.
•
If the vehicle’s ignition is in either ACC or RUN, the
vehicle charge indicator may not display a value
greater than 99% state of charge due to vehicle
loads.
The push button ignition can be placed in the following
modes:
OFF
•
The engine is stopped.
•
Some electrical devices (e.g., power locks, alarm,
etc.) are still available.
START/STOP Ignition Button
1 — OFF
2 — ON/RUN
GETTING TO KNOW YOUR VEHICLE 35
2
Loading ...
Loading ...
Loading ...