Dodge 2024 Hornet_Hybrid sedan 2024 DODGE HORNET_HYBRID

User Manual - Page 228

For 2024 DODGE HORNET_HYBRID.

PDF File Manual, 288 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Engine Oil Filter Selection
A full-flow type disposable oil filter should be used for
replacement. The quality of replacement filters varies
considerably. Only high quality Mopar® certified filters
should be used. If a Mopar® Engine Oil Filter is unavail-
able, only use filters that meet or exceed SAE/USCAR-
36 Filter Performance Requirments.
ENGINE AIR CLEANER FILTER
For the proper maintenance intervals page 220.
WARNING!
The air induction system (air cleaner, hoses, etc.) can
provide a measure of protection in the case of engine
backfire. Do not remove the air induction system (air
cleaner, hoses, etc.) unless such removal is neces-
sary for repair or maintenance. Make sure that no
one is near the engine compartment before starting
the vehicle with the air induction system (air cleaner,
hoses, etc.) removed. Failure to do so can result in
serious personal injury.
Engine Air Cleaner Filter Selection
The quality of replacement filters varies considerably.
Only high quality Mopar® certified filters should be used.
Engine Air Cleaner Filter Inspection and
Replacement Gas
Follow the recommended maintenance intervals as
shown in the Maintenance Plan in this section.
Engine Air Cleaner Filter Removal
1. Loosen the fasteners from the engine air cleaner
filter cover using a suitable tool.
2. Lift the engine air cleaner filter cover to access the
engine air cleaner filter by rotating at the hinge and
pulling the cover away from the engine.
3. Remove the engine air cleaner filter from the hous-
ing assembly.
Engine Air Cleaner Filter Installation
NOTE:
Inspect and clean the housing if significant dirt or
debris is present before replacing the engine air
cleaner filter.
1. Install the engine air cleaner filter into the housing
assembly with the engine air cleaner filter inspec-
tion surface facing downward.
2. Tighten engine air cleaner filter cover fasteners
using a suitable tool.
CAUTION!
Do not overtighten the engine air cleaner filter cover
lid screws or damage may result.
Engine Air Cleaner Filter Inspection and
Replacement PHEV
Follow the recommended maintenance intervals as
shown in the Maintenance Plan in this section.
Engine Air Cleaner Filter Removal
1. Remove the engine cover.
2. Loosen the fasteners from the engine air cleaner
filter cover using a suitable tool.
3. Loosen the air duct clamp using a suitable tool.
Engine Air Cleaner Filter Cover
1 Engine Air Cleaner Filter Cover
2 Fasteners
Engine Air Cleaner Filter Cover
1 Air Duct Clamp
2 Engine Air Cleaner Filter Cover
3 Fasteners
226 SERVICING AND MAINTENANCE
Loading ...
Loading ...
Loading ...