Loading ...
Loading ...
Loading ...
All of the key fobs provided with your new vehicle have
been programmed to the vehicle electronics
page 272.
NOTE:
A key fob that has not been programmed is also consid-
ered an invalid key.
IGNITION SWITCH
KEYLESS ENTER ‘N GO™ IGNITION
This feature allows the driver to operate the ignition
with the push of a button as long as the key fob is in the
passenger compartment.
The START/STOP ignition button has three operating
modes. The three modes are: OFF, ON/RUN, and START.
The push button ignition can be placed in the following
modes:
OFF
•
The engine is stopped.
•
Some electrical devices (e.g., power locks, alarm,
etc.) are still available.
ON/RUN
•
Driving mode.
•
All electrical devices are available (e.g., climate con-
trols, heated seats, etc.).
START
•
The engine will start.
Starting The Engine With A Depleted Key Fob Battery
If the ignition state/mode does not change with the
push of a button, the key fob may have a low or
depleted battery. In this situation, a backup method can
be used to operate the ignition switch:
Place the key fob in the cupholder, and then press the
ignition button.
NOTE:
If the key fob battery is depleted, and the vehicle doors
were locked using the key fob lock button, Passive Entry
lock button (if equipped), or the vehicle App
(if equipped), the engine must be started using the
described backup starting method. The vehicle doors
can then be unlocked using one of the unlock methods
(key fob, Passive Entry handle, or vehicle App).
To Stop The Engine With A Depleted Key Fob Battery
Push and hold the ignition button for several seconds,
or push it three times quickly.
NOTE:
•
The ignition button will not activate if the key fob is
inside the rear cargo compartment while the liftgate
is open.
•
If the ignition is in the ON/RUN position for 30 min-
utes while the gear selector is in PARK, the ignition
will automatically be placed in the OFF position.
•
For information on normal starting, see
page 97.
•
When opening the driver's door and the ignition is in
the ON/RUN (engine not running) position, a chime
will sound to remind you to place the ignition in the
OFF position. In addition to the chime, the “Vehicle
On” message will display in the cluster.
Disabling A Key Fob Left Inside The Vehicle
The key fob can be disabled from starting the vehicle if
it is left in the passenger compartment. To do this, pro-
ceed as follows:
1. Close all doors and the liftgate.
START/STOP Ignition Button
1 — OFF
2 — ON/RUN
Place Key Fob In Cupholder
34 GETTING TO KNOW YOUR VEHICLE
Loading ...
Loading ...
Loading ...