Loading ...
Loading ...
Loading ...
2.
Before raising the vehicle, use the wheel bolt wrench to
loosen, but not remove, the wheel bolts on the wheel
with the flat tire. Turn the wheel bolts counterclockwise
one turn while the wheel is still on the ground.
NOTE:
Placement for the front and rear jack locations are
critical. See the following images for proper jacking
locations.
CAUTION!
Do not attempt to raise the vehicle by jacking on loca-
tions other than those indicated in the Jacking
Instructions for this vehicle.
3. Jack lifting points can be identified by an opening
under an access panel that exposes the steel lifting
flange. Before positioning the jack, remove the
access panel with the provided screwdriver or simi-
lar tool. Place the jack underneath the lifting area
that is closest to the flat tire. Turn the jack screw
clockwise to securely engage the jack saddle to the
lifting area of the sill flange, centering the jack
saddle within the notch of the sill trim.
Loosening The Wheel Bolts
Jacking Locations
Front Lifting Point
Front Jacking Location
Rear Lifting Point
208 IN CASE OF EMERGENCY
Loading ...
Loading ...
Loading ...