Loading ...
Loading ...
Loading ...
•
It is the driver’s responsibility to use the brake and
accelerator during the semi-automatic parking
maneuver.
•
When the system instructs the driver to remove their
hands from the steering wheel, the driver should
check their surroundings and begin to back up
slowly.
•
The system will cancel the maneuver if the vehicle
speed exceeds 5 mph (7 km/h) during active steer-
ing guidance into the parking space. The system will
provide a warning to the driver at 3 mph (5 km/h)
that tells them to slow down. The driver is then
responsible for completing the maneuver if the sys-
tem is canceled.
•
If the system is canceled during the maneuver for
any reason, the driver must take control of the
vehicle.
WARNING!
•
Drivers must be careful when performing parallel
or perpendicular parking maneuvers even when
using the ParkSense Active Park Assist system.
Always check carefully behind and in front of your
vehicle, look behind and in front of you, and be
sure to check for pedestrians, animals, other
vehicles, obstructions, and blind spots before
backing up and moving forward. You are respon-
sible for safety and must continue to pay attention
to your surroundings. Failure to do so can result in
serious injury or death.
•
Before using the ParkSense Active Park Assist sys-
tem, it is strongly recommended that the ball
mount and hitch ball assembly be disconnected
from the vehicle when the vehicle is not used for
(Continued)
WARNING!
towing. Failure to do so can result in injury or dam-
age to vehicles or obstacles because the hitch ball
will be much closer to the obstacle than the rear
fascia/bumper when the vehicle sounds the con-
tinuous tone. Also, the sensors could detect the
ball mount and hitch ball assembly, depending on
its size and shape, giving a false indication that an
obstacle is behind the vehicle.
CAUTION!
•
The ParkSense Active Park Assist system is only a
parking aid and it is unable to recognize every
obstacle, including small obstacles. Parking curbs
might be temporarily detected or not detected at
all. Obstacles located above or below the sensors
will not be detected when they are in close
proximity.
•
The vehicle must be driven slowly when using the
ParkSense Active Park Assist system in order to be
able to stop in time when an obstacle is detected.
It is recommended that the driver looks over his/
her shoulder when using the ParkSense Active
Park Assist system.
EXITING THE PARKING SPACE
NOTE:
The function does not work for exiting a perpendicular
parking space, but only exiting parallel parking spaces.
Activation
To activate this function, push the Active ParkSense
switch once, then select “Parallel Park Exit” from the
Uconnect touchscreen. After selection, the system acti-
vates and instructs the driver on the operations that have
to be carried out to perform the maneuver correctly.
Selection Of The Maneuver Side
Use the turn signal to choose the direction that you want
to perform the maneuver. Use the right arrow indicator
to perform the maneuver to the right side and use the
left arrow indicator to perform the maneuver to the left.
During the maneuver, the system instructs the driver to
shift to REVERSE, and operate the turn signal in the
direction you want to exit. Let go of the steering wheel
and use the brake or accelerator pedals as instructed,
while the system handles the steering automatically for
exiting the parking space. If the driver continues to
carry out a voluntary or involuntary action on the steer-
ing wheel during the exit maneuver (touching or holding
the steering wheel to prevent its movement), the
maneuver will be interrupted.
Shift To Reverse Then Move Backward
128 STARTING AND OPERATING
Loading ...
Loading ...
Loading ...