Loading ...
Loading ...
Loading ...
To perform an auto transition on ATEM Television Studio HD8:
1 On the preview bus, select the video source that you want on the program output.
2 Select the transition type using the transition type buttons in the transition control block.
3 In the system control, set the transition rate and adjust any other parameter for the
transition as needed.
4 Press the AUTO button in the transition control block to initiate the transition.
MSTR A LT
<
BNK BNK
>
GATE CAM
COMP LIM
EQ EXP
LEVEL PAN
SOLO SOLO SOLO SOLO SOLO SOLO SOLO SOLO SOLO SOLO
SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL
Camera
1
Camera
2
Camera
3
Camera
4
Camera
5
Camera
6
Camera
7
Camera
8
Media
Player
1
Media
Player
2
1 2 3
4 5 6
7 8 9
ENTER 0 RESET
HOME
SETTINGS
KEYERS
DVE STINGER DIP
COLOR
TALK
AUDIO AUX
BORDER
CAMERA
CONTROL
WIPE
MEDIA
PLAYERS
SUPER
SOURCE
MIX
FTB
MACRO
CALL
MUTE
SPKR
STUDIO
PGM
MIX
DIM
CANS
TALK
OFF
ON AIR
STOP
REC
SWITCH
GRAB
STILL
FTB
DSK 1
CUT
DSK 2
CUT
DSK 1
AUTO
DSK 2
AUTO
DSK 1
TIE
DSK 2
TIE
SHIFT
SHIFT
PREV
TRANS
MACRO ON ON ON ON
BKGD
DIP
CUT AUTO
DVE STING
MIX WIPE ARM
KEY 1 KEY 2 KEY 3 KEY 4
1 2 3 4
PGM
5 6 7 8
M/V
PVW
AUX 1
AUX 2
Transition types, for example dip, mix and wipe,
have their own independent selection button
During the transition, the red and green buttons on the program and preview buses both turn
red to indicate that you are in the middle of a transition. The fader bar indicator displays the
position and progress of the transition and the transition rate display updates to indicate the
number of frames remaining as the transition progresses.
At the end of the transition, sources selected on the program and preview buses are
exchanged to indicate that the video source that was on preview is now on program and
vice versa.
Each transition type has its own independent transition rate allowing the operator to perform
faster transitions by simply selecting the transition type and pressing the AUTObutton. The
previously used transition rate is remembered for that transition type until it is changed.
A production switcher provides multiple methods of transitioning from one shot to another.
Generally, you use a simple cut transition to move from one background source to another.
Mix, dip, wipe and DVE transitions allow you to transition between two background sources
by gradually phasing out one and phasing in another. Stinger and Graphic Wipe are special
transitions which will be covered in a later section. Mix, dip, wipe and DVE transitions are
performed as an auto transition or manual transition using the transition control block.
The Auto transition button is part ofthe
Transitions Style group
92Operating your ATEM Switcher
Loading ...
Loading ...
Loading ...