Loading ...
Loading ...
Loading ...
Recording a Macro using ATEMSoftware Control
In the example below, we’re going to create a macro that will set your ATEM switcher to perform
a 3 second mix transition from color bars to color 1, pause for 2 seconds, then perform a 3
second mix transition to black. Try building this macro on your ATEM switcher so you can learn
the steps in creating macros.
1 Launch ATEM Software Control and open the macros window.
2 Click on the create button in the macros window to select the create page.
3 Click on a macro slot you want to record your macro to. In this example, click on macro
slot1. An orange border will appear around the slot you have selected.
4 Click on the create macro button (‘plus’ icon) to open the create macro popup window.
If you want to, you can enter the name of your macro and type a description. This lets you
easily keep track of your macros and quickly see what each macro does. When you click on
a macro, your notes will appear in the status window.
To start recording a macro, select a macro slot, then click on the
createmacro button. Type in your notes and click ‘record’.
5 Click the ‘record’ button.
The popup window will close and a red border will appear around your ATEM Software
Control panel indicating your macro is now recording. Notice the red ‘add pause’ button
at the top of the border.
Now that your macro is recording, you can start performing your switcher actions.
While recording, the create macro button will change to a
‘record’ button. When you have completed your switcher
actions, click on the ‘record’ button to stop recording.
136Using Macros
Loading ...
Loading ...
Loading ...