Loading ...
Loading ...
Loading ...
Camera Control
Camera Control Monitoring Output
You can select any SDI output for camera control monitoring. When controlling your cameras
via the camera control panel, you can monitor the adjustments via this output. Choose any
output from the menu.
Remote Source Network
ATEM Television Studio HD8 ISO model switchers are visible over your local network by default,
so if you are planning on streaming directly to the switcher using Blackmagic Studio Camera 6K
Pro or URSA Broadcast G2 you can get started straight away. To turn this off, uncheck enable
switcher to be discovered on the network.
Audio Settings
The audio tab contains all the audio settings separated into five categories, split audio, split MADI,
talkback, mix minus and general.
Audio settings
Split Audio
ATEM Television Studio HD8 switchers can split a stereo input signal into two separate mono
channels. This is helpful for mixing a mono input into both channels on the stereo master
output. You can also select between splitting all audio into separate channels, or select each
input individually.
You can also split MADI channels into separate mono channels.
Use the checkboxes to split MADI into separate mono channels
50ATEM Software Control
Loading ...
Loading ...
Loading ...