Loading ...
Loading ...
Loading ...
DIAGNOSTICS & TROUBLESHOOTING
Whirlpool Smart All-In-One Washer & Dryer
n
2-5
Connued on following page . . .
For Service Technician Use Only
Scroll down and select “Door Unlock” and verify the door is
“” (see NOTE below).
NOTE:
The “state” of the door lock reverses when you select “On”
and “O”.
For example:
• if the door is unlocked, selecng “Door Unlock” will lock
the door
• if the door is locked, selecng “Door Unlock” will unlock
the door
Figure 3
Scroll back up and tun on loads as follows:
• Turn “Motor Turn Le/CCW” On – conrm CCW drum
rotaon
• Turn “Motor Turn Le/CCW” O
• Turn “Motor Turn Le and Right” On – conrm le and
right drum rotaon
• Turn “Motor Turn Le and Right” O
3$*(
< Component Activation
Motor Turn Left /CCW
Motor Turn Left and Right
Off
Off
Figure 4
• Turn “Wash Heater” On – conrm voltage measurement.
: Turn “Wash Heater” On only long enough to
test voltage, otherwise damage to component may result.
• Turn “Wash Heater” O
• Turn “Dry Heater” On – conrm voltage measurement.
: Turn “Dry Heater” On only long enough to
test voltage, otherwise damage to TCO’s may result.
• Turn “Dry Heater” O
• Skip “Door Unlock”
Figure 5
• Turn “Drain Pump” On – conrm voltage measurement
• Turn “Drain Pump” O
• Turn “Recirculaon Pump” On – conrm voltage measurement
• Turn “Recirculaon Pump” O
• Turn “Dry Fan” On – conrm voltage measurement
• Turn “Dry Fan” O
Figure 6
“Skip”
Loading ...
Loading ...
Loading ...