Loading ...
Loading ...
Loading ...
1-12
n
Whirlpool Smart All-In-One Washer & Dryer
GENERAL INFORMATION
Cleaning the Drain Pump Filter/Draining Residual Water
1.
Open the drain pump fi
lter access door at the bottom right
corner at the front of the washer/dryer.
2.
Place a broad, fl at container beneath the drain pump fi lter
to collect the drain water. Pull out the black hose, remove
the plug, and drain the hose into the container. Empty
the container. Repeat this procedure if necessary until all
the water has drained. Make sure that the black hose is
completely dry.
NOTE: Perform the following procedure every 6 months.
Black hose
Cleaning the Drain Pump Filter/
Draining Residual Water
3. Lay a cotton cloth beneath the drain pump fi lter to absorb
any water still in it. Then remove the drain pump fi lter by
turning it counterclockwise.
4. Remove large clumps of lint by hand from the fi lter and
place lint in a suitable waste container. Remove r
emaining
residue from the fi lter by rinsing with water.
5. Reinsert the drain pump fi lter by turning it clockwise.
Make sure to turn it in as far as it will go, with the fi lter
handle left in a vertical position.
WARNING
Electrical Shock Hazard
Disconnect power before cleaning.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
Loading ...
Loading ...
Loading ...