Loading ...
Loading ...
Loading ...
42
SPORTDOG.COM
SETTINGS
TRACKING ONLY: Choose to enable or disable all stimulation functions. Select Yes to make the TEK Series 1.5 a
tracking only system. Select No to use an E-Collar with your system.
Default TEK-V1.5L: Yes
Default TEK-V1.5LT: No
STIM LEVELS: Choose the number of increments for the Stim Level. Select from 20 (Default) up to 99.
STIM BUTTONS: Set the default Stim Button configuration for when a new dog is added. See the “TRAINING”
section for a detailed list of stimulation options for each field.
ALERT:
1. From the main menu, select SETTINGS > GENERAL > ALERT.
2. Press the Right Arrow Key to toggle among the action types: NONE, TONE, VIBE, BOTH.
3. Press BACK to return to the main menu.
USER NAME:
At initial set-up, you can name your Handheld Device.
1. From the main menu, select SETTINGS > GENERAL > SET NAME. A text entry screen displays.
2. Use the Arrow Keys on the Menu Selection Pad to enter a name.
3. Select the when finished.
HANDHELD UPDATE RATE:
The update rate on your Handheld Device will update automatically according to the following GPS Collar
battery status:
• Good Battery - Every 2.5 seconds
• Medium Battery - Every 10 seconds
• Low Battery - Every 25 seconds
COMMUNICATION
The COMMUNICATION screen allows you to set the User ID, GPS channel, and E-Collar channel. The User ID is
a unique identifier used by the Handheld Device and shared with the GPS Collar with E-Collar Module. The GPS
channel is the radio channel used for communication between the GPS Collar and the Handheld Device. The
E-Collar channel is the radio channel used for communication between the E-Collar Module and the Handheld
Device. The collar learns the User ID, GPS channel, and E-Collar channel during the pairing process.
The Handheld Device uses an ID value to distinguish it from other Handheld Devices. This ID is factory set and for
most users will never need attention. The ID value can be viewed on either the STATUS or ABOUT screens.
If the factory-set User ID on your Handheld Device conflicts with another Handheld Device, you should change
the User ID to eliminate the conflict. Alternately, if two users want to have the ability to monitor the same dog(s)
with each user operating his own Handheld Device, they can choose to set their User IDs to match.
The only reason to change the GPS or E-Collar channel is if there is outside interference (other radios in the area)
causing communications problems.
Loading ...
Loading ...
Loading ...