Loading ...
Loading ...
Loading ...
34
SPORTDOG.COM
TRAINING
STIM BUTTONS
TO USE TRAINING MODE:
The DOG TRAINING screen allows you to send a signal to
deliver stimulation to your dog in order to correct a behavior.
You can switch among the dogs currently being trained and
select the type and intensity level of stimulation.
NOTE: In training mode, the User-Defined Stim Buttons are
active, allowing you to select among 3 predefined stimulation
types for the currently selected dog.
1. From the main menu, select DOG TRAINING.
2. Press the right or left arrows on the Menu Selection Pad
to choose among dogs in the system. The current dog is
shown at the bottom of the screen.
3. Select the desired level of continuous stimulation for that dog.
4. To send stimulation to the selected dog, press 1 of the 3 stim buttons on the left side of the Handheld Device
matching to the type of stimulation desired. When the desired button is pressed, the corresponding icon will
highlight to confirm that the signal has been sent.
The circles on the left side of the screen correspond with the User-Defined Stim Buttons 1, 2, and 3 on the left side
of your Handheld Device. The Stim Button SETTINGS for the current dog are shown.
To send a stimulation, press the Stim Button (1, 2, or 3) on the Handheld Device for the type of stimulation you
want to deliver. When the desired button is pressed, the corresponding icon will highlight to confirm the signal
has been sent.
Example: To deliver continuous (C) press Stim Button 1. To deliver tone (T), press Stim Button 2. To deliver
vibration (V), press Stim Button 3.
You can adjust the Stim Button SETTINGS at any time from the main menu by selecting SETTINGS > MY DOGS >
DOG where DOG is the name of the dog for which you want to change the stim button settings.
TYPES OF STIMULATION
C
CONTINUOUS STATIC STIMULATION: You control both when and how long static stimulation is
delivered, up to a maximum of 10 seconds. After 10 seconds, the static stimulation will “time out” for
5 seconds. You will see a transmission time out message on the screen. Release the User-Defined Stim
Button and press it again for additional static stimulation to be delivered.
V VIBRATION STIMULATION: The collar will vibrate when this User-Defined Stim Button is pressed.
T
TONE STIMULATION: The collar will make a rapid beeping noise when this User-Defined Stim Button
is pressed.
M
MOMENTARY STATIC STIMULATION: The E-Collar Module will deliver static stimulation for 1/10 of a
second, when this User-Defined Stim Button is pressed.
R
RISING STATIC STIMULATION: The static stimulation will rise from the current level to the maximum
level when this User-Defined Stim Button is pressed and held.
P1
USER PROGRAMMABLE STIMULATION 1: The E-Collar Module will deliver static stimulation according
to the User-Defined setting.
P2
USER PROGRAMMABLE STIMULATION 2: The E-Collar Module will deliver static stimulation according
to the User-Defined setting.
Loading ...
Loading ...
Loading ...