Loading ...
Loading ...
Loading ...
38
SPORTDOG.COM
COMPASS
COMPASS
The TEK Series 1.5 System comes with a built-in electronic compass and GPS tools to
track your location and guide you to previously saved locations.
From the main menu, select COMPASS. The COMPASS screen displays.
NOTE: When using the compass, hold the Handheld Device up to a 45° angle and point
the antenna forward along your line of travel.
The COMPASS screen allows you to see your current heading, track the bearing to pre-
defined way points, track the bearing to a dog and enable/disable Vehicle Mode. The
compass shows north as a red N and will rotate as you move to keep its orientation.
Your current heading is shown at the lower right corner of the display.
SET YOUR STARTING LOCATION
The SET START POINT screen allows you to define a way point specific to your starting location prior to working
the dogs in a particular area.
TO SET A START POINT
NOTE: You must have a good GPS lock before you can mark a new start point.
1. From the main menu, select SET START POINT. A prompt appears, “YOU ARE ABOUT TO CHANGE THE
STARTING LOCATION. ARE YOU SURE YOU WANT TO CONTINUE?”
2. Select YES to set a new starting location.
MARK A LOCATION WITH WAY POINTS
The WAY POINTS screen allows you to save your current GPS location or the current GPS location of tracked dogs
as a way point, navigate to, rename and/or delete existing way points. You can store up to 20 way points. If you
have set a start point, it appears as an X on the TRACKING screen. Other way points are shown by their respective
number.
TO MARK YOUR LOCATION AS A NEW POINT:
NOTE: You must have a good GPS lock before you can mark a new way point.
1. From the main menu, select WAY POINTS > MARK NEW POINT > YOUR LOCATION. A text entry field appears.
2. Use the Arrow Keys to enter a name for the new way point.
3. Select when finished.
TO MARK A DOG AS A NEW POINT:
NOTE: You must have a good GPS lock to mark a new way point. Your dog’s last location shown on the TRACKING
screen will be marked as a new point. To mark the most recently transmitted location (see section “TO VIEW THE
DOG STATUS:”), view the TRACKING screen immediately before marking the location as a new point).
1. Identify your dog on the TRACKING screen.
2. Navigate to the main menu. From the main menu, select WAY POINTS > MARK NEW POINT. A list of active
dogs being tracked displays.
3. Use the Arrow Keys to highlight the dog you want to mark as a way point.
4. Press the Right Arrow Key.
Loading ...
Loading ...
Loading ...