Loading ...
Loading ...
Loading ...
En
33
Adjusting track parameters (TRACK MENU)
PREVIEW button
Automatically begins a preview when a sample is selected during brows-
ing. The preview status can be switched by tapping.
When ON:
When the rotary selector is turned to move the focus, a selected sample
plays once only.
When OFF:
Even if the rotary selector is turned to move the focus, samples are not
played.
!
The default is ON.
! If a sample is selected when this is switched from OFF to ON, it plays
once only.
ASSIGNED SAMPLE button
Tapping this jumps to the location of the sound source assigned to that
track.
!
This is not displayed when [FILTER TYPE] is [TEXT].
Recording an external input sound and editing a source sound (SAMPLING/EDIT)
An external or internal sound can be recorded, and the waveform of a sound source can be edited.
1 2 3 4 5 6
7
8
9
1 SOURCE
Selects the target for sampling.
The target can be selected from [LINE IN] and [RESAMPLE].
! This cannot be operated during recording.
2 REC THRESHOLD
If the input signal exceeds this value during recording standby,
recording begins automatically.
! This cannot be operated during recording.
! The default is OFF.
! OFF / -60 dB to -20 dB / PLAY
3 REC LENGTH
Sets the length of time to continue recording from the start of record-
ing. This is dependent on the BPM of the sequencer. When the speci-
fied length is reached, recording stops automatically.
! This cannot be operated during recording.
! The default is OFF. When OFF, recording stops automatically
when 32 seconds are exceeded after the start of recording.
! OFF / 1 to 4 (BAR level)
4 SELECTION START
Sets the start point of the selection range.
! This cannot be operated during recording.
5 SELECTION END
Sets the end point of the selection range.
! This cannot be operated during recording.
6 MONITOR LEVEL
Adjusts the volume for when monitoring during recording and
editing.
This can be set from 0 to 127. The default is 100, which does not
change the balance (track volume, panning, headphone balance,
etc.) set with the mixer, etc. The relative volume can be adjusted from
here.
! This can also be operated during recording.
7 REC
Starts input recording standby.
Tapping this starts standby, and recording starts if the input signal
exceeds [REC THRESHOLD].
! When [REC THRESHOLD] is OFF, the state switches to recording
(lit) the moment this is tapped.
Not standby (off) Standing by (flashing) Recording (lit)
If recording is performed in the state in which a sample is already
assigned, the waveform is overwritten and the sample name at the
top right becomes the [RECORDED TEMP.] indication.
8 SOFT LIMITER
A limiter can be applied to the input sound.
! The default is OFF.
Loading ...
Loading ...
Loading ...