Loading ...
Loading ...
Loading ...
BAND REPLACEMENT (See Figure 20)
1. Remove the guard covering the brake band.
2, Remove cotter pin (1) and clevis pin (2) from the
brake rod (3) and band (4),
3. Remove cotter pin (6) and nut (5) from the other
end of the brake band anchor point,
4. Remove brake band by slipping it off the brake
drum and pulling it off the axle.
5. Install the new band by reversing the order above.
NOTE; Make sure to use new cotter pins when
installing the brake band.
_1_ WARNING:The guard(s) must be in place to
protect the rider(s) from the rotating parts of the
Fun-Kart. DO NOT operate the Fun-Kart without
the guards securely in place.
.
7.
Replace the guard,
Perform BRAKE TEST as described in the
OPERATION-OPERATiNG INSTRUCTIONS
before operating the Fun-Kart. Re-adjust brake as
necessary and repeat BRAKE TEST until the
brake willhold and stop the Fun-Kart properly.
MK016
Figure 20. New Band Replacement
41
Loading ...
Loading ...
Loading ...