Loading ...
Loading ...
Loading ...
The brake pedal is latched by pushing down the
brake pedal and raising the latch so its notch (a) fits
on the pedal bushing (b). The return action of the
brake pedal will keep the brake applied.
The pedal Is unlatched by pushing the brake pedal
and allowing the latch to fall away.
If the Fun--Kart is equipped with a parking brake lever
(c), it is applied by pulling up (d) on the lever or
released by pushing down (e) on the lever located on
the left side of the kart. The force required to pull up
or push down on the lever may be reduced by first
pushing down on the foot brake pedal. Pull up or
push down on the brake lever, then release the foot
brake pedal.
NOTE: Operating the vehicle with the parking brake
applied will result in reduced life of the lining or pads
and decreased braking ability.
Clutch (6)
Clutch driven Karts have a centrifugal type clutch
mounted directly to the engine, The clutch does not
engage at tow engine idling speeds, but engages as
engine RPM is increased.
NOTE: Avoid clutch slippage when operating the
Kart, Slippage generates excessive heat that can ruin
the clutch bearing in two or three hours of operation.
Slipping can occur by riding at slow speeds with high
engine RPM such as trying to climb hills, pulling
through soft soil or high grass or with brake applied,
Control Console (7)
Some models are equipped with a control console
located in front of the steering wheel. This console
may contain an engine choke control, an engine
start/stop switch and a light switch.
1. Choke Control - Pull control knob out until it
stops for full choke, push half-way in for partial
choke or push in all the way for no choke°
NOTE: Refer to the Engine Owner's Manual for
specific choke operating instructions.
2. Start/Stop Switch _A three position key
operated switch, On electric start models, insert
key and turn to the START position until engine
- starts, then release key.To stop the engine, turn
key to the STOP position. Always remove the key
after stopping to prevent unauthorized use of the
Fun-Kart.
Light Switch - A two position toggle switch that
controls the lights. To turn lights on, move the
switch to the ON position.
Figure 2. Operating Controls
MK002B
19
Loading ...
Loading ...
Loading ...