Loading ...
Loading ...
Loading ...
_ WARNING: All Iocknuts must have full thread
engagement. For any Iocknut to function properly,
threads must extend completely through and at
least three threads beyond the Iocknut.
Two types of Iocknuts are used on this Fun-Kart:
1, Prevailing-Torque-type !ocknuts (1) have a locking
feature which deforms the thread in the nut. This
type of nut must be turned with a wrench after
being started (1 or 2 turns) by hand. The
deformed thread lock tends to have reduced
locking capability with disassembly and assembly,
Those lock-nuts are to be replaced each time they
are removed.
2. Free-Running-type Iocknuts (2) have notches
which grip a mating surface when the nut is
securely tightened against it,This type of nut must
be securely tightened to lock.
Engine Service
Please refer to your Engine Owner's Manual for
informationon engine service procedures.
Drive Components
Chains (See Figure 8)
The Fun-Kart may be equipped with one or more
chains to drive the rear wheels. After the first two
hours of operation, and before and after each use,
lubricate the chain(s) and check the tension
adjustment. Proper lubrication and adjustment is
essential for best component life.
WARNING: DO NOT touch chain(s), clutch or
torque converter immediately after riding.
Chain(s), clutch and torque converter may be hot,
resulting in a burn or other personal injury.
WARNING: The guards covering drive
components must be in place to protect the
operator and passenger in a two seat Kart, from
rotating parts, and to prevent mud and debris
from coming in contact with drive components.
Be sure to replace guards removed for
-maintenance.
27
Loading ...
Loading ...
Loading ...