Loading ...
Loading ...
Loading ...
CHAIN REPLACEMENT (See Figure 10)
REMOVAL
1. Remove guards covering drive components.
2. Rotate drive wheel to place master link (3) in
accessible position between two sprockets.
3. Slide the retaining clip (1) of the master link (3)
until the reliefs are centered over the link pins,
Remove clip and remove side plate (2).
4. Slide master link out and remove the chain.
INSTALLATION
1. Install new chain.
2. Slide the pin portion of the master link (3) in to
each end of chain to be connected.
3. Slide the side plate (2) portion of the master link
on to the pins.
4. Slide the retaining clip (1) on to the pins until clip
snaps securely in to place.
_ CAUTION: The master link should be
installed with the open end of the retaining clip (1)
facing away from direction of chain rotation (4).
direction of
chain rotation MA014
Figure 10. Chain Replacement
3O
Loading ...
Loading ...
Loading ...