Loading ...
Loading ...
Loading ...
WHEELREPLACEMENT
TheFun-Kartmaybeequippedwithspindleand/or
lugmountedwheels,Usethefollowingprocedurefor
wheelreplacement.
WARNING: Never place any part of your
body under the vehicle while it is on a jack or
jack stands. If the vehicle is to be started while
the tires are off the ground, support the rear of
the unit with a pair of suitable jack stands. If
these instructions are not followed, vehicle
damage, property damage, or personal injury can
result.
SPINDLE MOUNTED WHEELS (See Figure 15)
1. With Fun-Kart on the ground, loosen the spindle
nut(1).
2. Jack up the Fun-Kart to raise the wheel off the
ground.
3. Remove spindle nut and replace wheel.
4. Install spindle nut finger tight.
5, Lower the Fun-Karl to the ground.
_IL CAUTION: DO NOT over-tighten axle nuts. It
is only necessary to tighten the nut so the wheel
turns freely on the axle with minimum end play. If
the wheel does not turn freely, the nut is too tight.
(See MAINTENANCE-LOCKNUTS)
6. Tighten spindle nut so the wheel turns freely on
the spindle with minimum end play.DO NOT
OVER-TIGHTEN.
MK011
Figure 15.Wheel Replacement Art - Spindle Mounted
35
Loading ...
Loading ...
Loading ...