Loading ...
Loading ...
Loading ...
Wheels and tyres
359
Tyre repair
After inserting the sealant residue in the tyre,
you must again check the t
yre pressure about
10 minutes after starting the engine.
You should only use the tyre mobility set if the
vehicle is parked in a safe place, you are famil-
iar with the procedure and you have the nec-
essary tyre mobility set. Otherwise, you should
seek professional assistance.
Do not use the tyre sealant in the following
cases:
●
If the wheel rim has been damaged.
●
In outside temperatures below -20°C (-4°F).
●
In the event of cuts or perforations in the tyre
greater than 4 mm.
●
If you have been driving with very low pres-
sure or a completely flat tyre.
●
If the sealant bottle has passed its use by
date.
WARNING
Using the puncture repair kit can be danger-
ous, par
ticularly when filling the tyre on the
roadside. To reduce the risk of serious injury,
consider the following:
●
Stop the vehicle safely as soon as possible.
Park it at a safe distance from surrounding
trac to fill the tyre.
●
Ensure the ground on which you park is flat
and solid.
●
All passengers and particularly children
must keep a safe distance from the work
area.
●
Turn on the hazard warning lights to warn
other road users.
●
Always stop the engine, apply the elec-
tronic parking brake and put it in gear if fitted
with a manual gearbox, or press the parking
lock button P if fitted with an automatic gear
box, to reduce the risk of involuntary move-
ment of the vehicle .
●
Use the tyre mobility system only if you
are familiar with the necessary procedures.
Otherwise, you should seek professional as-
sistance.
●
The tyre mobility set is intended for tempo-
rary emergency use only until you can reach
the nearest specialised workshop.
●
Replace the repaired tyre with the tyre mo-
bility set as soon as possible.
●
The sealant is a health hazard and must be
cleaned immediately if it comes into contact
with the skin.
●
Always keep the tyre mobility set out of the
reach of small children.
WARNING
A tyre fill
ed with sealant does not have the
same performance properties as a conven-
tional tyre.
●
Never drive faster than 80km/h (50mph).
●
Avoid heavy acceleration, hard braking
and fast cornering.
●
Drive for only 10 minutes at a maximum
speed of 80 km/h (50mph) and then check
the tyre.
For the sake of the environment
Dispose of used or expired sealant observing
any l
egal requirements.
Note
A new bottle of sealant can be purchased at
SEAT dealerships.
Note
Take into account the separate instruction
manual pr
ovided by the tyre mobility system
manufacturer.
Loading ...
Loading ...
Loading ...