Loading ...
Loading ...
Loading ...
Miscellaneous situations
319
Towing the vehicle
Front towline anchorage
Fig.211 Fr
ont bumper on right: remove the lid.
Fig.212 Right side of the fr
ont bumper: towline
anchorage screwed in.
The housing of the removable towline anchor-
age is on the right side of the fr
ont bumper un-
derneath a cover ›››Fig.211.
The towing eye should always be kept in the
vehicle.
Bear in mind the instructions for towing
›››page31
7.
Fitting the towline anchorage
●
Remove the towing eye from the vehicle tool
kit in the luggage compartment ›››page312.
●
Remove the cover by pressing down on its
base and leave it hanging from the vehicle
›››Fig.211.
●
Screw the towing eye in the housing by
turning it to the maximum anticlockwise
›››Fig.212 , ›››
. Use a suitable object that
can compl
etely and securely tighten the towing
eye in its housing.
●
After towing, unscrew the towing eye clock-
wise with a suitable object.
●
Replace the cover and push it in until it clicks
into place.
●
Clean the towing eye if necessary and then
store it in the luggage compartment along with
the other vehicle tools.
NOTICE
The towing eye must always be completely
and firmly tight
ened. Otherwise, it could
jump out of the housing during towing.
Rear towline anchorage
Fig.213 R
ear bumper on right: remove the lid.
Fig.214 Right side of the r
ear bumper: towline
anchorage screwed in.
The housing of the screw towing eye is on
the right side of the r
ear bumper behind a lid
›››Fig.213.
Loading ...
Loading ...
Loading ...