Loading ...
Loading ...
Loading ...
204
Assistant systems
●
Always pay attention to the vehicle's sur-
r
oundings.
●
The control lamps of the lane departure
warning may have limited functionality due
to solar radiation.
Note
If Side Assist does not work as described in
this chapt
er, stop using it and contact a spe-
cialised workshop.
Driving with Side Assist
Fig.142 Contr
ol lamp of the lane departure
warning.
Fig.143 Contr
ol lamp of the lane departure
warning.
Connecting and disconnecting
Side Assist can be s
witched on and o by
accessing the Assistants menu in the infotain-
ment system.
Additionally it can be switched on and o by
accessing the Assistants menu on the instru-
ment cluster.
When the lane departure warning is ready to
operate, the indications in the control lamps will
turn on briefly as confirmation.
When the vehicle is restarted, the last adjust-
ment in the system will remain active.
Light indication
The control lamp provides an indication on the
corresponding side regarding the trac situa-
tion behind the vehicle, if it is deemed to be
critical. The control lamp on the left-hand side
indicates the trac situation to the rear left of
the vehicle, and the control lamp on the right-
hand side indicates the trac situation to the
rear right of the vehicle .
Keep the warning lamps zone of the lane de-
parture warning free of objects, adhesives or
the likes that may interfere with your visibility.
It lights up
It turns on once briefly: the lane departure warning
is activated and ready to operate, i.e. when acti-
vating the system.
It lights up continuously: the lane departure warn-
ing has detected a vehicle in the blind spot.
Flashes
A vehicle has been detected in the adjacent lane
and the turn signal has been engaged in the direc-
tion of the detected vehicle.
For vehicles that are also equipped with Lane As-
sist ›››page195, a warning to switch lanes will
also appear even though the turn signal has not
been engaged (Lane Assist “Plus”).
The control lamps light up when the ignition is
switched on and should turn o after approxi-
mately 2 seconds. This is the time taken for the
function check.
If there are no indications from the control lamp
of the lane departure warning, this means that
the lane departure warning has not detected
any other vehicles at the rear area.
Loading ...
Loading ...
Loading ...