Loading ...
Loading ...
Loading ...
224
Parking and manoeuvring
●
Vehicle load modifies the r
epresentation of
the guide lines. The width represented by the
lines decreases with vehicle load. Pay spe-
cial attention to the surroundings when the
inside of the vehicle of the luggage compart-
ment are loaded.
●
In the following situations, objects or other
vehicles appear to be further away or closer
than they actually are. Pay special attention:
–
If moving from a flat surface to a slope
and vice-versa.
–
If the vehicle is heavily loaded.
–
When the vehicle approaches objects
that are not on the ground surface or that
protrude from it. These objects may be out-
side the camera angle when reversing.
Note
●
It is important to take great care and pay
special att
ention if the driver is not familiar
with the system.
●
The reverse assist reference lines disap-
pear when the rear lid is open.
Connecting and disconnecting
Connect the reverse assist
●
Select reverse gear.
●
OR: in the inf
otainment system select
>
Assist
ants > Park assist.
Disconnect the reverse assist
●
Drive forward at a speed of at least 15 km/h
(9 mph).
Sho
wn on the display
The system’s functions and representations
may vary depending on the equipment.
The assistant's image view changes when the
factory-fitted tow hitch is electronically con-
nected to a trailer ›››page290.
Reverse assist functions and symbols
When the reverse assist is connected, you can
make adjustments using the function buttons.
Some adjustments are equipment-dependent.
Exit the current display
S
witch to angle parking ›››page225
Switch to the trailer hitching assistance
function
Switch to cross trac
Adjust the display: brightness, contrast
and colour.
Switch to park assist ›››page212
Display/hide the parking aid view
Guide lines
Gr
een horizontal lines: extension of the vehicle.
Yellow lines: vehicle path depending on the
steering angle.
Assistance function for hitching a trailer
On vehicles with a factory-fitted towing device,
this function can be used to move the vehicle
close to a tow bar.
Auxiliary lines are shown in the infotainment
system.
Green lines: distance to the trailer hitch. The
distance between the lines is approx. 0.30 m
Yellow line: pre-calculated direction of the
trailer hitch depending on how the steering
wheel is turned.
Cross trac
This view helps to monitor trac behind the
vehicle and can be used, for example, when
exiting garages or narrow exits.
Loading ...
Loading ...
Loading ...