Loading ...
Loading ...
Loading ...
196
Assistant systems
1
2
required from the driver and, where appropri-
at
e, the temporary deactivation of the lane
assist warning system:
–
In very sporty driving situations.
–
In adverse weather conditions and roads
in poor condition.
–
When passing through areas undergoing
works.
–
Before gradient changes of grade and
river beds.
●
Always observe the vehicle surroundings
carefully and drive proactively.
●
When the area of vision of the camera
becomes dirty, covered or is damaged, the
Lane Assist system function can be aected.
Driving with the Lane Assist System
Fig.138 On the instrument clust
er screen:
indications of the lane assist system.
Yellow line: The system intervenes assisting
on the r
epresented side.
White line: Lane line detected. The system
does not intervene.
Depending on the equipment, additional details
of the lane marking line currently detected by
the camera, e.g. dashed road markings, can
also be displayed on the instrument cluster
screen.
Control lamps
Lights up green
Lane Assist system active and availa-
ble.
Lights up yellow
The Lane Assist system intervening
with a rectification of the steering.
Switching the lane assist system on or o
In some countries, the Lane Assist System is al-
ways activated when the ignition is switched on.
The connection status is shown in the Driver
assistance menu of the Infotainment system or
the driver assistance systems menu after press-
ing the corresponding button. These menus can
be used to activate and deactivate the system.
The Lane Assist system is designed to actively
intervene as of approximately 60 km/h (35
mph) and if it has detected the lane boundaries
(system status: active).
If the control lamp of the instrument cluster dis-
play is o, it means that the system is connec-
ted but not ready to intervene or it is disconnec-
ted.
When you activate a turn signal, the system
temporarily goes into a passive state in order to
allow manual lane change.
An energetic rotation or rectification of the
steering wheel by the driver causes the system
to temporarily switch to a passive state.
Driver intervention prompt
If the steering is not corrected manually, the
system prompts the driver through an indication
on the instrument panel display and acoustic
warnings.
If no reaction is obtained from the driver, the
system switches to a passive state.
Regardless of the steering manoeuvres,
through an indication on the instrument panel
display and acoustic warnings, the driver is also
prompted to drive through the centre of the
lane if the steering correction lasts more than
reasonable.
Steering wheel vibration
The following situations may result in a steering
wheel vibration:
●
The lane ceases to be recognised during a
sudden intervention in the direction of the sys-
tem.
Loading ...
Loading ...
Loading ...