Loading ...
Loading ...
Loading ...
i!iiiii!iiii!i!iilili!ili!i:iiii':i:i!ii'iili i!'?l'ii iiiiiiiiiiIilllllllllllllllllllllllllllllllllllllllllllllllll
Electronic
display
Clock/timer buttons
J
Broil Self clean
button button
(pp. 16, 17) (p. 25)
Temperature
buttons
(pp. 13, 15,
17, 19)
Timed
cooking buttons
(pp. 19-22)
(p. 12)
Time buttons
(pp. 11, 19, 25)
When you first plug in the range, everything will
light up for 1 to 2 seconds, then a time of day and
"PF" will appear in the display. Press the OFF
button to clear "PF" from the display. If, after you
set the clock, "PF" again appears on the display,
your power was off for a while. Reset the clock.
• When you are not using the oven, the control is
an accurate clock.
• When you are using the oven or minute timer,
the display will show times, temperature
settings, and when command buttons have
been pressed.
• When showing the time of day, the display will
show hour and minutes.
• When you are using the minute timer, the
display will show minutes and seconds in the
following sequence:
-- For settings from 1 to 59 minutes, the display
will count down each second.
-- For settings 1 hour and over, the display will
count down hours and minutes.
• When you are using COOK TIME and/or STOP
COOKnMESTOPnMETIME, the display will show
hours and minutes or minutes
and seconds.
The control lock lets you shut down the control
panel command buttons. The control lock comes in
handy when you want to prevent others from using
the oven.
NOTES:
• You can only use the control lock when the oven
is not in use or when the control has not been
set.
• Set the control lock when cleaning the control
panel to prevent yourself from accidentally turning
on the oven.
• The control lock will stay on even after a power
failure.
To lock or shut down the control panel:
Press and hold the START button for 5 seconds.
START You will hear a single tone and "Loc" and
I_ will appear on the display. When the
control is locked, 3 tones will sound if you
press any command button other than
CLOCK or TIMER SET.
To unlock the control panel:
Press and hold the START button for 5 seconds.
START You will hear 3 tones followed by a single
tone. "Loc" and PI will disappear from the
display.
10
Loading ...
Loading ...
Loading ...