Loading ...
Loading ...
Loading ...
25
Need some help? Call 1300 889 785 or go to www.oricom.com.au
Using your SC530 Baby Monitor
Temperature monitor
Your new monitor comes with a sensor on
the Baby unit, which lets you keep an eye
on the temperature of your baby’s room. If it
gets too hot or too cold, the unit will tell you
by sounding an alert tone and showing the
temperature on the display screen. You can
display the temperature in °C or °F.
Temperature On the Parent unit
Below 16°C Display shows the temperature and
Too
Cold
16 – 24°C Display shows the temperature, no
warnings will be displayed.
Over 24°C Display shows the temperature and
Too
Hot
Changing the temperature format
1. To switch between
°C
or
°F
, press
on the
Parent unit and then use the arrow buttons to
scroll through to
Setup
. Press
.
2. When you see
Temperature
, press
again.
Important
Use the temperature sensor
only as a rough guide to the
temperature of your baby’s
bedroom. What’s displayed
might depend on where
you put the Baby unit in the
room.
It shouldn’t be used in place
of medical devices, which
may be more accurate.
Please note that your own
temperature reference
e.g. your central heating
thermostat may not be as
accurate, possibly due to
tolerances and positioning of
the thermostat in relation to
your baby monitor.
Healthcare professionals
advise that the ideal
temperature for your baby’s
room is between 16°C and
24°C.
Loading ...
Loading ...
Loading ...