Loading ...
Loading ...
Loading ...
Before you call for service...
Troubleshooting tips
Possible Causes What To Do
Clock and timerdo Plug on range is not completely * Make sure electrical l)lug, is l)htgged,, into a live, properly
not wok inserted ha the electrical outlet, grounded ot/tlet.
A fuse in your home * Replace tile fl/se or reset tile circuit breaker:
may be blown or the
circuit breaker tripped.
Oven controls improperly set. * See tile Using the clock and timer section.
Oven will not self-clean The oven temperature is * _Mlow the range to cool aud reset the controls.
too high to set a self-clem_
operation.
Oven controls improperly set. * See the Using the self-cleaning oven section.
The probe is plugged into * Rel//ove the probe fl'om the oven.
the outlet in the oven.
"Crackling" or This is the sound of the • This is normal.
"popping" sound metal heating and cooling
during both the cooking and
clemfing functions.
Excessive smoking Excessive soil. * Touch the CLEAR/OFFpad. Open the windows to
during a clean cycle rid the room of smoke. _'ait tmtil the LOCKEDlight
goes off. _,Vil)e tq) the excess soil and reset the (leau
cvcle.
Oven door will not Oven too hot. * Allow the oven to cool beh)w locking temperattu'e.
open after a clean cycle
Oven not clean after a Oven controls not properly set. * See the Using the self-cleaning oven section.
Oven was heavily soiled. • (',leau tip heavy spillovers before startiug the cleau
cycle. Heavily soiled ovens u/av need to sell_cleau
again, or for a lon,_er,, period of tiu/e.
"LOCKED"flashes The self-cleml cycle has been • Ch)se the oven door.
in the display selected but the door is not
closed.
"LOCKED"light is The oven door is locked • Touch the CLEAR/OFFpad. Allow the oven to cool.
on when you want because the temperature
to cook inside the oven has not
dropped below the
locking temperature.
"F--and a number
orletter"flash
in the display
You have a fm_ction error code. • Touch the CLEAR/OFFpad. Put the ovela back into
operation,
If the fm_ction code repeats. • Discom_ect all power to the range for at least 30
seconds and then reconnect power. If the flmction
error code repeats, call for serxice.
40
Loading ...
Loading ...
Loading ...