Loading ...
Loading ...
Loading ...
ge.com (U.S.)
Careand cleaning of the range, www.OEAppliances.ca(Canada)
Be sure aft controls are off and aft surfaces are cool before cleaning any part of the range.
If your range is removed for cleaning, servicing or any reason, be sure the anti-tip
device is reengaged properly when the range is replaced. Failure to take this
precaution could result in tipping of the range and cause injury.
How to Remove Protective Shipping Film and Packaging Tape
Carefully grasp a corner of the protective
shipping fihn with your finge_ and slowly
})eel it fl'om the appliance stli_ilce. Do
not use any shaq) items to remove the
film. Remove all ot the film betore using
the appliance fin" the fi_st time.
To assm'e no damage is done to the
finish _fftile product, tile saiest way to
remove the adhesive ti'om packaging tape
on new appliances is an application of a
household liquid dishwashing detergent.
Apply with a soft cloth and allow to soak.
NOTE."Theadhesive must be removed from all
parts./t cannot be removedif it is baked on.
Control Knobs
Thecontrol knobsmay be removedfor easier
c/eanlbg,
Make sure tile knobs are in tile OFF
positions and pull them straight off tile
stems fin" cleaning.
Tile knobs can be cleaned in a
dishwasher or they may also be washed
with soap and waml: Make sure tile insides
of tile knobs are dry be%re repladng.
Replace tile knobs ill tile OFFposition
to ensure pYopel" placement.
Burnerca[
Burnerhead
Electrode"_ Burnerbase
CAUTION:DO NOT OPERATETHE
BURNER WlTHOUTALL BURNER
PARTSIN PLACE.
Burner Assembly
Tile bm'ner assemblies should be washed
regularly and, of coui_e, after spillovei_.
Turnall controlsoff before removing burner parts.
Tile bm'ner grates, bm'ner heads and
btlYneY caps can be i'eliloved J[Oi" easy
cleaning.
The electrode ot the spark igniter is
eN)osed beyond tile suYlilce ot tile
burner base. _,_]/en cleaning tile cooktop,
be caretul not to snag the electrode ot
the spark igniter with yore" cleaning
cloth. Damage to the igniter could occm:
Toavoid snagging a cloth on the spark
igniter, leave the burner heads inplace
when cleaning the cooktop.
Be careflfl not to push ill any cooktop
controls while cleaning the cooktop.
A slight electrical shock might result
which could cerise veil tO knock over
hot cookware.
_.V_sh burner parts with an alli)ml)ose
non-abrasive cleaner and wali/l watei:
Soak stubborn soil. Dry thenl with a
cloth---<lo not reassemble while wet.
To reassemble, replace tile burner head
fiIst, then the bm'ner cap and finally the
burner grate. Be sm'e the pins ill the
burner head are properly located ill tile
burner base holes.
3/
Loading ...
Loading ...
Loading ...