Loading ...
Loading ...
Loading ...
tempe
™
Your device is compatible with the tempe temperature sensor. You can attach the sensor to a secure strap or
loop where it is exposed to ambient air, so it provides a consistent source of accurate temperature data. You
must pair the tempe sensor with your device to display temperature data. See the instructions for your tempe
sensor for more information (garmin.com/manuals/tempe).
Device Information
Changing the QuickFit
®
Bands
1 Slide the latch on the QuickFit band, and remove the band from the watch.
2 Align the new band with the watch.
3 Press the band into place.
NOTE: Make sure the band is secure. The latch should close over the watch pin.
4 Repeat steps 1 through 3 to change the other band.
Specifications
Battery type Rechargeable, built-in lithium-ion battery
Battery life
Up to 14 days in smartwatch mode
Up to 20 hours in GPS mode
Water rating 5 ATM
1
Operating temperature range From -20º to 55ºC (from -4º to 131ºF)
Charging temperature range From 0º to 45ºC (from 32º to 113ºF)
Wireless frequencies/protocols
2.4 GHz @ 3.2 dBm nominal
13.56 MHz @ -40 dBm nominal
1
The device withstands pressure equivalent to a depth of 50 m. For more information, go to www.garmin.com/waterrating.
34 Device Information
Loading ...
Loading ...
Loading ...